PRONAR T672ECO, User Manual

Page: 8 / 150

Introduction
6
PRONAR T672ECO
START-UP OF THE MACHINE
Before starting the machine, the user will
be familiarized with its construction, prin-
ciple of operation, available equipment
and operation, and above all safety rules.
THE SCOPE OF ACTIVITIES
• Read the contents of this OPERA-
TOR'S MANUAL and follow the rec-
ommendations contained therein.
• Adjust the height of the eye drawbar
to the hitch on your tractor.
• Perform a daily review machine
according to the guidelines in the
schedule Inspection.
• Check all machine lubrication points,
if necessary lubricate as recom-
mended in lubricating.
• Check the correct tightening of screw
connections (in particular the sus-
pension, drawbar and road wheels).
• Make sure that the pneumatic, hy-
draulic and electrical connections on
the agricultural tractor comply with
the requirements, otherwise do not
connect the trailer.
• Make sure that the hydraulic oil in the
trailer and tractor is of the same type
and grade.
If all of the above activities have been
carried out and the technical condition of
the trailer does not raise any objections,
connect the machine to the tractor.
Start the tractor, check individual systems
and carry out a test run of the machine and
perform a test drive without load (without
a loading box). It is recommended that
visual inspection be carried out by two
people, one of them should be perma-
nently in the tractor's cab. The test run
must be carried out in the order shown
below.
• Connect the machine to the appro-
priate hitch on the agricultural tractor.
• Connect the brake, electrical and hy-
draulic system lines.
• By activating individual lights, check
the correct operation of the electrical
system.
• Activate and check correct operation
of the hydraulic tipping system.
• When moving off check the operation
of the service brake.
• Perform a test drive. While driving,
CAUTION
The first start-up involves checking the machine in
the presence of the Seller. The Seller is obliged to
carry out training in the safe and proper operation of
the machine.
Training by the seller does not release the user from
the obligation to become familiar with the contents
of this manual and to follow the recommendations
contained therein.