PRONAR 663/4 SILO, Operator'S Manual, Page: 14 / 135

Pronar T663/4 T663/4 SILO SECTION 1
1.4
1.1.3 LIST OF FACTORY NUMBERS
VIN
S Z B 6 6 3 4 X X X
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is often essential to give the factory numbers of parts or the VIN number of the trailer,
therefore it is recommended that these numbers are inscribed in the spaces above.
1.2 PROPER USE
The trailer is designed for transport of harvested crops and agricultural products as well as
loose, bulk and long load materials at the farm and on public roads. It is acceptable to
transport construction materials, mineral fertilisers and other loads, if fulfilling conditions
indicated in section 4. Non-compliance with the recommendations concerning the carriage
and loading of goods described by the Manufacturer and the road transport regulations in
force in the country in which the trailer is used shall void the warranty and is regarded as the
use of the machine contrary to its intended purpose.
The trailer is not intended or designed for transporting people, animals or goods classified as
dangerous materials.
The trailer is constructed according to current safety requirements and engineering
standards. The brake system and the light and indicator system meet the requirements of
road traffic regulations. The maximum speed of the trailer on public roads in Poland is 30
km/h (pursuant to Traffic Law Act of June 20th 1997, article 20). In the countries where the
trailer is used, the limits stipulated by the road traffic legislation in force in a given country
must be observed. The trailer speed must not, however, be greater than the maximum design
speed of 30 km/h.