Slide beamsplitter into frame.
Metal pull bar faces
up and out.
Universal Set-Up Sheet
Place Universal sled
mount on stand.
(Use tall stand for
standing talent and
short stand for
seated talent).
Secure with thumb screw.
1
Place LCD on sled (control buttons should face towards rear).
Secure LCD with thumb screws.
2
Slide beamsplitter frame onto sled.
3
5
Rev: 070708
(Clean beamsplitter with included yellow microfiber cloth)
Secure Beamsplitter frame with
thumb screws (hand tighten only).
4
Completed assembly of teleprompter with camera.
