STEP 2 - ATTACH BRACKET TO STAND
STEP 1 - ATTACH STAND MOUNT
TO BRACKET
(may be already attached)
The ProLine Freestand’s patent pending mounting system
allows the use of any size/weight camera. The FreeStand ships
with 2 stands, one short and one tall. Use the short stand if
the subject is in a low chair. For normal chair and standing
subjects use the taller stand.
Screw stand mount into bottom of bracket.
ProLine FreeStand Set-Up Sheet
Tighten handle after
bracket is set onto stand.
1
Slide the LCD monitor onto the rail and
tighten the thumbscrew.
The LCD can be adjusted fore/aft by loosening
the thumbscrew. To remove the LCD unscrew
the thrumbscrew all the way and slide the LCD
off the rail.
Note: The thumbscrew has a stop to keep it
from coming out all the way.
STEP 3 - LCD INSTALL
NOTE: Camera and tripod not provided.
PROLINE FREESTAND
FULLY ASSEMBLED
Revised 102808
