Promise Vess A2600 Product Manual Download

Page: 345 / 365

Restore from network drive

Follow these steps to restore the system disk from a saved version on the local RAID volume.

1. Create the Recovery Environment if you have not yet done so. See “Create the recovery

environment” on page 331.

Connect a keyboard, mouse and monitor and insert the USB flash drive containing the RE

Image into and a USB port on the Vess A2000.

3. Power on the Vess A2000. The system will boot from the USB drive.

4. Click the

Next>

button in the first menu that appears.

5. Select

Restore your computer using a system image that you created earlier

and click the

Next>

button.

339

Product Manual

Windows System Recovery

Summary of Contents for Vess A2600













































































































































































































































































































































































Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands

Promise Vess A2600, Product Manual

Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands