SNMP Settings (CLU)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal
status is Started.
To make SNMP service settings:
1.
Main Menu
>>
Additional Info and Management
>>
Software Management
>>
SNMP
>>
Startup Type
2.
Press the spacebar to toggle between
Automatic
and
Manual
.
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
•
Port Number
– 161 is the default
•
System Name
– (optional) Type a system name in this field
•
System Location
– Type a country name in this field
•
System Contact
– Type the email address of your system administrator in this field
•
Read Community
– Type a community name in this field
4.
Press
Control-A
to save your settings.
To start, stop or restart the
SNMP service, highlight
Start
,
Stop
, or
Restart
and press
Enter
.
163
Product Manual
Managing with CLU
