Promise Vess A2600 Product Manual Download

Page: 142 / 365

Enabling Media Patrol, PDM, and Power Management on a

Disk Array (CLU)

Media Patrol checks the magnetic media on physical drives. Predictive Data Migration (PDM)

migrates data from the suspect physical drive to a spare drive

before

the physical drive fails. Power

Management parks the heads, spins down, and stops rotation after a set period of time to reduce

power consumption.

Media Patrol, PDM, and Power Management are enabled by default. Enabled is the recommended

setting for both features.

To enable Media Patrol, PDM, and Power Management on a disk array:

Main Menu

Disk Array Management

2. Highlight the disk array you want and press

Enter

3. Highlight

Media Patrol

and press the spacebar to toggle between

Enable

and

Disable

4. Highlight

PDM

and press the spacebar to toggle between

Enable

and

Disable

5. Highlight

Power Management

and press the spacebar to toggle between

Enable

and

Disable

Press

Control-A

to save your settings.

136

Vess A2000 Series NVR Storage Appliance

Promise Technologies

Summary of Contents for Vess A2600













































































































































































































































































































































































Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands

Promise Vess A2600, Product Manual

Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands