manualshive.com logo in svg

Promise Technology VTrak N1008, Product Manual

Share
Download
Promise Technology VTrak N1008 Product Manual Download Page 16

13

HDD Replacement

Product 

Manual 

    

  

Cautions

Swing open the drive carrier handle before you insert the drive carrier 

into the enclosure.

To avoid hand contact with an electrical hazard, remove only one drive 

carrier a time.

1.  Press the drive carrier release button. 

2. 

Grasp the handle between thumb and finger, gently pull the empty drive carrier out of the 

enclosure.

3. 

Carefully lay the drive into the carrier with the power and data connectors facing away from the 

carrier handle.

Removing the Drive Carrier

The drive carrier accommodates 2.5-inch and 3.5-inch drives.

Hdd r

eplacement

VTrak models are shipped with Hard Disk Drives (HDD) installed, so it will not be necessary to install new drives in 

order to use the device. If it is necessary to change a drive, follow the instructions in this section. It is best to have 

identical HDD in all bays, or at least identical specifications for capacity and speed. Go to PROMISE Support online 

to find a list of compatible HDD for the VTrak Series.

Drive carrier front view

Carrier release button

Summary of Contents for VTrak N1008





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands