Promise Technology VTRAK M210i, Product Manual

Page: 93 / 318

Chapter 4: Management with WebPAM PROe
79
Starting or Restarting Web Server service
To start or restart the Web Server service, click the Start or Restart button.
Making Telnet Settings
VTrak’s Telnet service enables you to access VTrak’s Command Line Interface
(CLI) through a network connection. To make Telnet settings:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Telnet Setting link in Management View.
4. Enter the Telnet Port number.
2300 is the default.
5. Enter the Maximum Number of Connections.
4 is the default.
6. Enter the Session Time Out interval.
24 minutes is the default.
7. Click the Submit button.
8. Click OK in the confirmation box to restart the Telnet service with your
changes.
Changing the Startup Setting
1. Under Startup Type:
•
Click the Automatic option to start the service automatically during
system startup. Recommended.
• Click the Manual option to start the service manually (the service does
not start during system startup).
2. Click the Submit button.
Stopping Telnet service
To stop the Telnet service:
1.
Click the Stop button.
2. Click OK in the confirmation box.
Starting or Restarting Telnet service
To start or restart the Telnet service, click the Start or Restart button.
Making SNMP Settings
VTrak’s SNMP service enables the SNMP browser to obtain information from the
VTrak. The Trap Sink is where SNMP events are sent and can be viewed.