Promise Technology VTRAK M210i Product Manual Download

Page: 41 / 318

Chapter 3: Setup

Setting up VTrak with the CLU

At the administrator@cli> prompt, type

menu

and press Enter.

The CLU main menu appears.

Figure 1. CLU main menu

With

Quick Setup

highlighted, press Enter.

The first Quick Setup screen enables you to make Date and Time settings.

Setting system date and time

Press the arrow keys to highlight

System Date

Press the backspace key to erase the current date.

Type the new date.

Follow the same procedure to set the System Time.

Press Ctrl-A to save these settings and move to the Management Port
configuration screen.

Making Management Port settings

By default, DHCP is disabled on VTrak and the default Management Port IP
address is set to 10.0.0.1. The TCP Port is set to 2300.

Use a new Management Port IP address to log into the VTrak over your network.

Manual IP settings

To make Management Port settings manually:
1.

Press the arrow keys to highlight

IP Address

Press the backspace key to erase the current IP Address.

Type the new IP Address.

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands