Promise Technology VTRAK M210i Product Manual Download

Page: 182 / 318

VTrak M610i, M310i, M210i Product Manual

168

Making Node Settings

These settings affect both VTrak iSCSI data ports.

Note that Header and Data Digest work best with initiators that have a TCP
Offload Engine (TOE).

To make iSCSI node settings:
1.

From the Main Menu, highlight

iSCSI Management

and press Enter.

Highlight

iSCSI Node

and press Enter.

Node information appears.

Highlight

iSCSI Node Settings

and press Enter.

This screen enables you to make iSCSI Node Settings.

Highlight the items you want and press the backspace key to erase the
current value, then type the new value:
•

Node Name

•

Node Alias – Maximum of 32 characters. Use letters, numbers, space
between words and underscore. An alias is optional.

•

Outstanding R2T

•

Maximum Burst Length

•

Default Time to Wait

•

Default Time to Retain

Highlight the items you want to set and press the spacebar to toggle
between

Enabled

and

Disabled

•

Header Digest

•

Data Digest

•

Unidirectional CHAP Authorization

•

Bidirectional CHAP Authorization

Press Ctrl-A to save your settings.

Viewing Target Port Information

To view iSCSI port target information:
1.

From the Main Menu, highlight

iSCSI Management

and press Enter.

Highlight

iSCSI Ports

and press Enter.

Highlight

Target Port 1

Target Port 2

and press Enter.

Port information appears.

Summary of Contents for VTRAK M210i































































































































































































































































































































Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands

Promise Technology VTRAK M210i, Product Manual

Search results

Summary of Contents for VTRAK M210i

Reviews:

Related manuals for VTRAK M210i

Brands by name

Popular brands