manualshive.com logo in svg

Promise Technology VTRAK M210i, Product Manual, Page: 175 / 318

Share
Download
Promise Technology VTRAK M210i Product Manual Download Page 175

Chapter 5: Management with the CLU

161

5.

Highlight 

Start

 and press Enter.

If necessary, you can pause and resume or stop and restart the Redundancy 
Check. You can use the logical drive while Redundancy Check is running.

Locating a Logical Drive

This feature helps you identify the physical drives assigned to the logical drive 
you are working with in the CLU. To locate a logical drive:
1.

From the Main Menu, highlight 

Logical Drive Management

 and press Enter.

2.

Highlight the disk array you want and press Enter.

3.

Highlight 

Locate Logical Drive

 and press Enter.

The drive status LEDs for the physical drives in this logical drive will blink for 
one minute.

Summary of Contents for VTRAK M210i































































































































































































































































































































Reviews:

No comments