Promise Technology VTRAK M210i, Product Manual

Page: 103 / 318

Chapter 4: Management with WebPAM PROe
89
Shutting Down the Subsystem
You can only do part of this function in WebPAM PROe. Additional action is
required, as described below. To shutdown the subsystem:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Shutdown link in Management View.
A Shutdown or Restart tab will appear.
4. On the Shutdown or Restart tab, choose Shutdown from the dropdown
menu.
5. Click the Submit button.
6. In the confirmation box, type the word confirm in the field provided.
7. Click the OK button.
When the controller shuts down, your WebPAM PROe connection will be
lost.
8. Wait for no less than two minutes.
9. Manually turn off the power supply switches the back of the subsystem.
Monitoring the Shutdown
To monitor a shutdown, you must use the Command Line Interface (CLI) though
a serial connection to the VTrak.
At the “administrator@CLI>” prompt, type shutdown -a shutdown .
When the “Shutdown complete. It is now safe to power off the subsystem.”
message appears, turn off the power supply switches.