Promise Technology VTrak D5000 Series Product Manual Download Page 237

Page: 237 / 245

ontactIng

ecHnIcal

uPPort

PROMISE Technical Support provides several support options for PROMISE users to access information and

updates. We encourage you to use one of our electronic services, which provide product information updates for

the most efficient service and support.

PROMISE E-Support: https://support.promise.com

PROMISE web site: http://www.promise.com//

When you contact us, please have the following information available:

•

Product model and serial number

•

Firmware version

•

A description of the problem / situation

• System configuration information, including: motherboard and CPU type

Please refer to “Export Service Report” on page 130 to create a service report with the needed information.

228

Promise

Technology

VTrak D5000 Series Product Manual

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands