Promise Technology VTrak D5000 Series Product Manual Download Page 23

Page: 23 / 245

Warning
Two persons are needed to safely place the

unit onto the rails.

DO NOT lift the unit by the handles

Unpacking

Packing List

The VTrak D5000 Series box contains the following items:

•

VTrak D5000 Unit

•

One Quick Start Guide printed

•

Sliding rail assembly for rack mounting

•

DB9-to-RJ11 serial data cable

Warning
The electronic components within the VTrak enclosure

are sensitive to damage from Electro-Static Discharge

(ESD). Observe appropriate precautions at all times

when handling the VTrak or its subassemblies.

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands