Promise Technology VTrak D5000 Series Product Manual Download Page 143

Page: 143 / 245

Update Firmware

Use this function to flash (update) the firmware on the VTrak D5000.

Download the latest firmware image file from PROMISE support:

http://www.promise.com/support/

and save it to your Host PC or TFTP server.

Important

Verify that no background activities are running on the RAID subsystem.

To update the firmware on the subsystem and JBOD expansion units:

Click the

Administration

tab.

Click the

Firmware

Update

tab.

3. Choose a download option:

•

Local File through HTTP

– Click the

Choose File

button, locate the firmware

image file, click the file to choose it, then click the

Open

button.

•

TFTP Server

– Enter the TFTP Server host name or IP address, port number and file name.

4. Optional. Check the Non-disruptive Image Update (NDIU) box.

NDIU updates the RAID controllers and I/O modules one at a time, enabling I/O operations continue

during the firmware update. Updates with this option take a longer period of time to complete. Only dual

controller models support this feature.

Click the

Download

button.

The next screen shows the Flash Image (firmware image file) Version Number and Build Date.

Click the

Submit

button.

The progress of the update displays.

Warning

Do NOT power off the subsystem during the update!

Do NOT move to any other screen until the firmware update operation

is completed!

134

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Related manuals for VTrak D5000 Series

Brands by name

Popular brands