Promise Technology VTrak D5000 Series Product Manual Download Page 121

Page: 121 / 245

Changing User Passwords

This action requires

Administrator

Super User

privileges.

To change a user’s password:

Click the

Administration

tab.

Click the

User Management

icon.

3. In the User list, click the user you want, then click

Change Password

4. In the Change Password dialog box, enter the information in the fields provided:

• New Password
• Retype Password

Click the

Save

button.

Deleting a User

This action requires

Administrator

Super User

privileges

To delete a user:

Click the

Administration

tab.

Click the

User Management

icon.

3. In the User list, click the user you want, then click the

Delete

button.

In the

Confirmation

box, type the word “

confirm

” in the field provided and click the

Confirm

button.

Note

The Administrator account cannot be deleted.

112

Promise

Technology

VTrak D5000 Series

Summary of Contents for VTrak D5000 Series





















































































































































































































































Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands

Promise Technology VTrak D5000 Series, Product Manual

Search results

Summary of Contents for VTrak D5000 Series

Reviews:

Brands by name

Popular brands