Making IO Portal Settings
Use the IO Portal menu to view, change, enable or disable IP settings for the IO Ports. To change IO port IP
settings:
1.
Click the
Device
tab.
2.
Click the
Network Management
tab, expand
Portal
and click on
IO Portal
.
3. To change IO Portal settings, click to select the configuration you want to change, and click on the
Modify
button.
•
Check the
Enable DHCP
box to enable a DHCP server to make the IO
port network settings. DHCP is currently supported in IPv4 only.
• For manual network settings, type the IO Port IP address, subnet
mask and gateway IP address into the fields provided.
• Enter a
TCP Port Number
or use the default 3260.
4.
Click the
Save
button.
IO Portal Configuration
117
Promise
Technology
Management with WebPAM PROe