Promise Technology Vess A3340 Product Manual Download Page 99

Page: 99 / 241

estorIng

Actory

efAults

(clu)

This function restores the factory default settings to the firmware and software items you select.

Caution

Restoring default settings can disrupt your Vess A-Series functions.

Use this feature only when necessary

Main Menu

Additional Info and Management

Restore Factory Defaults

2. Highlight the setting groups you want to restore and press the spacebar to toggle between

Yes

and

“Yes” means this setting is restored to the default value.

“No” means the current setting remains untouched.

3. Highlight

Restore Factory Defaults

and press

Enter

Press Y to confirm the reset.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Promise Technology Vess A3340, Product Manual, Page: 99 / 241

Search results

Summary of Contents for Vess A3340

Reviews: