Promise Technology Vess A3340 Product Manual Download Page 97

Page: 97 / 241

Managing SNMP Trap Sinks (CLU)

Viewing a List of Trap Sinks

To create a trap sink:

Main Menu

Additional Info and Management

Software Management

SNMP

Trap Sinks

A list of the current trap sinks appears.

Adding a Trap Sink

To add a trap sink:

Main Menu

Additional Info and Management

Software Management

SNMP

Trap Sinks

Create New Trap Sink

Trap Sink IP address

Press the backspace key to erase the current value, then type the new IP address in this field.

3. Highlight

Trap Filter

and press the spacebar to toggle through the severity levels.

See the Table below.

4. Press

Control-A

to save the Trap Sink.

Event Severity Levels

Level

Description

Fatal

Non-recoverable error or failure has occurred.

Critical

Action is needed now and the implications of the condition are serious.

Major

Action is needed now.

Minor

Action is needed but the condition is not a serious at this time.

Warning

User can decide whether or not action is required.

Information

Information only, no action is required.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands