Promise Technology Vess A3340 Product Manual Download Page 83

Page: 83 / 241

Running Redundancy Check (CLU)

Redundancy Check is a maintenance procedure for logical drives in fault-tolerant disk arrays that

ensures all the data matches exactly.

To run Redundancy Check:

Main Menu

Logical Drive Management

2. Highlight the logical drive you want and press

Enter

3. Highlight

Background Activities

Start Redundancy Check

The redundancy check parameters appear.

•

Auto Fix

– Corrects inconsistencies automatically

•

Pause On Error

– Pauses the Redundancy Check when an error is found

To change a parameter, highlight it and press the backspace toggle between

Yes

and

4. Highlight

Start

and press

Enter

If necessary, you can pause and resume or stop and restart the Redundancy Check. You can

use the logical drive while Redundancy Check is running.

For Redundancy Check rate, see “Making Background Activity Settings (CLU)” on page 74.

Locating a Logical Drive (CLU)

This feature helps you identify the physical drives assigned to the logical drive you are working with

in the CLU. To locate a logical drive:

1. Main Menu >> Logical Drive Management

2. Highlight the logical drive you want and press Enter.

3. Highlight Locate Logical Drive and press Enter.

The drive carrier status LEDs flash for one minute.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands