Promise Technology Vess A3340 Product Manual Download Page 21

Page: 21 / 241

npAckIng

Note

The Vess A-Series can accommodate SATA (3Gbps/6Gbps) hard drives.

ackIng

Ist

The

Vess A3340

box contains the following items:

•

One Vess A3340 NVR Storage Appliance

•

Screws for disk drives (40 pieces for 8 bays)

•

One 1.5m (4.9 ft) Power cord

Sliding rail assembly for rack

mounting*

* These items might be an optional feature in your region. Please contact your sales representative to learn

whether this is included or an option for your Vess A-Series enclosure.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands