Promise Technology Vess A3340 Product Manual Download Page 209

Page: 209 / 241

198

Vess A Class NVR Storage Appliance

Promise Technology

eBuIldIng

ISk

rray

When you rebuild a disk array, you are actually rebuilding the data on one physical

drive.

•

When a physical drive in a disk array fails and a spare drive of adequate capacity is

available, the disk array begins to rebuild automatically using the spare drive.

•

If there is no spare drive of adequate capacity, but the Auto Rebuild function is

ENABLED, the disk array begins to rebuild automatically as soon as you remove the

failed physical drive and install an unconfigured physical drive in the same slot. See

“Making Rebuild Settings”

•

If there is no spare drive of adequate capacity and the Auto Rebuild function is

DISABLED, you must replace the failed drive with an unconfigured physical drive,

then perform a Manual Rebuild.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands