Promise Technology Vess A3340 Product Manual Download Page 206

Page: 206 / 241

195

Troubleshooting

Vess A3340 Product Manual

ntIcIPatIng

ard

rIve

roBlemS

It is recommended that you always keep a healthy spare drive installed, and run Media

Patrol as a background activity so a failing hard drive can migrate data to the spare

before the status turns critical.

In Web PAM PROe, Media Patrol is enabled or disabled using the Background Activities

menu, you can also create a schedule to run Media Patrol.

Note

In order that hard disk problems can be anticipated and dealt with

smoothly, it is highly recommended to make sure that Media Patrol is

enabled and running and Auto Rebuild is enabled if you are not using a

spare drive. If using a spare drive, make sure it is healthy and available.

View individual physical drive information

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands