Promise Technology Vess A3340 Product Manual Download Page 16

Page: 16 / 241

Front panel LED behavior for Vess A3340 system:

LED Description

Power

Lights BLUE to indicate the system is powered on.

System Status

Lights GREEN when healthy, RED if there is a critical problem (LD offline, fan malfunc

tion, voltage out of range, system temperature alert), remains dark when not ready.

Fan Status

Lights GREEN when healthy, RED indicates a fan in the System module is not operating

in normal range, ORANGE indicates the CPU fan module is not present.

Recording

RED indicates application running.

Network

Link/Activity

One LED for each 1000BASE-T LAN port. Lights BLUE to indicate a valid link, blinks

BLUE to indicate activity on the port.

Global RAID

Status

Lights GREEN when healthy or RED if any RAID volume is offline, ORANGE for critical

state of any logical drive.

Global HDD

Activity

Blinks BLUE to indicate one or more drives are being accessed, remains dark when no

drives are being accessed.

HDD Status

Lights GREEN when healthy, RED if the RAID member is offline or there is a physical

disk error, ORANGE indicates the drive is rebuilding, and a dark LED indicates either no

drive is installed or the drive is not configured.

OPAS USB

Lights GREEN if an OPAS device (USB disk) is detected, RED if the OPAS operation has

failed, blinks GREEN when an OPAS operation is in progress.

ess

a3340

front

panel

leD

LED indicators on front of Vess A3340

Power

System

Status

Fan

Recording

Network Link/Act

HDD Activity

Global RAID

OPAS USB

HDD Status

Introduction

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands