Promise Technology Vess A3340 Product Manual Download Page 100

Page: 100 / 241

uzzer

Making Buzzer Settings

The buzzer sounds to inform you that the Vess A-Series needs attention.

To make buzzer settings:

Main Menu

Buzzer

A list of Controllers appears with the current buzzer setting and status.

2. Highlight

Enabled

and press the spacebar to toggle between

Yes

and

3. Press

Control-A

to save your settings.

Silencing the Buzzer

Caution

This action disables the buzzer for all events.

To silence the buzzer, follow the procedure above for disabling the buzzer.

Managing with CLU

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands