Promise Technology Vess A3120 Quick Start Manual Download Page 34

Page: 34 / 40

Click the

Update

button.

A new logical drive is displayed under New Logical Drives. If there is free capacity re

maining, you can specify another logical drive now or wait until later.

2. When you are done specifying logical drives, click the

Next

button.

Step 3 – Summary

The Summary lists the disk array and logical drive information you specified.

To proceed with disk array and logical drive creation, click the

Submit

button.

Note

This function does not automatically create a hot spare drive. After

the disk array is created, you can create a hot spare drive for it.
Please download the Product Manual at : www

promise.

com for more information.

Logging out of WebPAM PROe

There are two ways to log out of WebPAM PROe:

•

Close your browser window

•

Click

Logout

on the WebPAM PROe banner

Clicking

Logout

brings you back to the Login Screen. After logging out, you must enter

your user name and password in order to log in again.

ysteM

hutdown

To shutdown the system, perform the normal shutdown procedure according to the op-

erating system being used.

Vess A3120

Storage Appliance for Video Surveillance

Summary of Contents for Vess A3120








































Search results

Summary of Contents for Vess A3120

Reviews:

Related manuals for Vess A3120

Brands by name

Popular brands

Promise Technology Vess A3120, Quick Start Manual

Search results

Summary of Contents for Vess A3120

Reviews:

Related manuals for Vess A3120

Brands by name

Popular brands