Promise Technology PegasusPro R8 Product Manual Download Page 28

Page: 28 / 78

Installation and Setup

PegasusPro Product Manual

6 Connect 10G Network (Share Port)

Use a suitable Ethernet cabling (Cat. 6e or better)

to connect one to four of the Share Ports (10G network

ports) on the rear panel. The network cables for the Share Ports can be connected to a switched Ethernet

network, or connect directly to a collaborative user computer.

The 10G network Share Port enables collaborative workflow for users connected via 10G network. Users

install the same software, PROMISE Utility Pro, and use it to mount shared folders for collaborative work.

Mac users can use the SANLink3 high performance Ethernet-to-Thunderbolt™ 3 bridge to complete the

10G network connection to their workstation.

PegasusPro is compatible with

a Thunderbolt™4 Windows PC

except when it is connected

behind a Thunderbolt 4 dock or

Hub (Goshen Ridge based).

PROMISE SANLink3 Ethernet-to-Thunderbolt™ 3 bridge is recommended for Mac

collaborative users that do not have an Ethernet port.

PegasusPro R8 10G ports on rear panel

Summary of Contents for PegasusPro R8














































































Search results

Summary of Contents for PegasusPro R8

Reviews:

Related manuals for PegasusPro R8

Brands by name

Popular brands

Promise Technology PegasusPro R8, Product Manual

Search results

Summary of Contents for PegasusPro R8

Reviews:

Related manuals for PegasusPro R8

Brands by name

Popular brands