23
Managing the PegasusPro
PegasusPro Product Manual
Pegaus Utility Pro
Many users might find it simpler to perform administrative operations using Pegaus Utility Pro.
Fortunately, many of the necessary administrative functions can be done easily using either method. In this
section we describe most of the basic setup functions and some of the user tasks that can be completed
using PROMISE Utility Pro. Also note that PROMISE Utility Pro is used to manage any additional Pegasus3
or Pegasus32 units connected to the PegausPro via Thunderbolt™ 3 cable.
First Time Setup
If this is the first time using PROMISE Utility Pro, make sure to follow the instructions to power on and
connect the device in “Installation and Setup” on page 8. If you have installed the latest driver and
software, begin with the section “Connect Power and power on” starting on page 14.
Follow the steps below if you are setting up PegasusPro for the first time.
1. Launch the PROMISE Utility Pro and you are presented with instructions on connecting a
network cable to a 10G network port.
If you have connected the PegasusPro to one or more Pegasus3 or Pegagus32 units via
Thunderbolt™, those will appear in the new menu providing a quick overview of the status of
these systems. It is necessary to login for the first time setting up the system.
