Promise Technology PegasusPro R16 Product Manual Download Page 22

Page: 22 / 80

Installation and Setup

PegasusPro Product Manual

Summary of the setup procedure

The setup procedure for the PegasusPro is simple and easy. The device is shipped with hard disk

drives installed and a RAID array configured, so it is just necessary to plug it in and connect the device.

However, you should install the PROMISE Utility Pro software used for monitoring and administration of

the system. Mac users, please follow the setup procedure here or in the Quick Start Guide.

The setup process is summarized below.

1. Download the latest PegasusPro hardware drivers and software package including PROMISE

Utility Pro (download these from PROMISE website) on the Mac computer used for initial setup.

2. Install the PegasusPro Driver

3. Install PROMISE Utility Pro.

4. Connect the power cord and power on the PegasusPro R16.

5. Connect the PegasusPro Private Port to your computer with a Thunderbolt™ 3 cable.

6. Connect the PegasusPro Share Port to the network.

Unpacking

Carefully remove contents of shipping package, unpack the device and shipped components from the

protective packaging. The equipment contained in the shipment is sensitive to electrostatic discharge.

The system is heavy as it is shipped with hard disk drives installed. Use two persons when lifting or

carrying the enclosure.

Make sure to download and install the hardware drivers for the PegasusPro before you connect the

Thunderbolt™ 3 cable.

Go to promise.com > Products > Pegasus > PegasusPro > Download > Drivers

Then download and install PROMISE Utility Pro on the host Mac computer and collaborative user

computers. The software download files are the same for all computers that will use the PegasusPro.

Go to promise.com > Products > Pegasus > PegasusPro > Download > Utilities

1 Download Software and Driver

Summary of Contents for PegasusPro R16
















































































Search results

Summary of Contents for PegasusPro R16

Reviews:

Related manuals for PegasusPro R16

Brands by name

Popular brands

Promise Technology PegasusPro R16, Product Manual

Search results

Summary of Contents for PegasusPro R16

Reviews:

Related manuals for PegasusPro R16

Brands by name

Popular brands