72
Promise
Technology
Pegasus3 Series
Locating an Enclosure
If you have multiple Pegasus units, and you want to verify which unit you are accessing in the Promise
Utility, use the
Locate
function.
To locate a enclosure:
1. Go to
Admin
drop-down menu and choose the
Back View
option to see a virtual view of the back
of the Pegasus3.
2. Mouse-over the
Enclosure
, then double-click on it to activate the Locate function.
The Drive Power / Status LEDs on all drive carriers blink blue and orange for one minute.
Drive Power / Status LEDs
blink blue and orange
Running the Locate function to identify an enclosure
Double-click on the back view to activate Locate
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...
