Promise Technology Pegasus3 R4 Product Manual Download Page 58

Page: 58 / 232

Managing the Pegasus3

Pegasus3 Product Manual

Access Pegasus Utility in Windows

In Windows, you can click on the shortcut for Pegasus Utility on the Desktop. In Windows 10 you also

have the option to use Windows Cortana.

Please see

“Installation and Setup for Windows Users” on page 19 to see examples of the shortcut for the

different Windows OS.

Accessing the Pegasus software utility

Access Promise Utility in Mac

For Mac users, accessing the Promise Utility includes:

•

Opening and Closing

•

Unlocking the UI

Opening

To open the Promise Utility, double-click the

Promise Utility

icon in the Macintosh Dock.

The Promise Utility window opens and displays the Dashboard.

See “The Promise Utility interface with the Dashboard displayed” on page 48.

Closing

There are two ways close the Promise Utility:

Promise Utility icon on Mac desktop

•

Click the Promise Utility dropdown menu and choose

Quit Promise Utility

•

Press cmd-Q ( Q)

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 58 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: