Promise Technology Pegasus3 R4, Product Manual, Page: 34 / 232

21
Installation and Setup for Windows Users Pegasus3 Product Manual
Step 2: Connect the Pegasus3 to your Windows computer
Insert one end of a Thunderbolt 3 cable into the Thunderbolt 3 port on the Pegasus3 and
connect the other end of the cable to a Thunderbolt 3 port on your computer. Make sure the cable
connector is oriented correctly to the port on both the Pegasus3 and the computer. It should fit
easily in place when correctly positioned.
Pegasus3 R6 connected to Windows computer
To power source
Power cable
Thunderbolt 3 cable
Thunderbolt 3 ports
Windows
computer
Make sure there is a
Thunderbolt 3 lightning bolt logo
on the cable connector
Thunderbolt 3 port on computer*
Pegasus3 R6
* Make sure the computer port is a Thunderbolt 3 port.
The port uses a USB Type-C connector, but there is a
Thunderbolt icon next to the port.