99
Managing the Pegasus3
Pegasus3 Product Manual
Making Individual Physical Drive Settings
To make individual physical drive settings:
1. Do one of the following actions:
•
Click the Physical Drive icon.
•
From the Device menu, choose Physical Drive.
2. Mouse-over the physical drive you want then click the
Settings
button.
3. Make changes as needed:
• Enter, change, or delete the alias in the Alias field.
• Choose Unconfigured or PassThru Configuration.
Unconfigured drives are not visible to your computer. Use them to make disk arrays.
PassThru drives are visible to your computer and are configured as individual drives. They
cannot be used to make a disk array.
4. Click the
Save
button.
5. Click the
X
icon to close the settings panel.
Physical Drive Settings
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...