89
Managing the Pegasus3
Pegasus3 Product Manual
Synchronization
Synchronization is automatically applied to logical drives when they are created. Synchronization
recalculates the redundancy data to ensure that the working data on the physical drives is properly in
sync.
Mouse-over on the logical drive, click the
View
button, and look under Logical Drive Information beside
the line that says
Synchronized
. A
Yes
means the logical drive was synchronized. See “Viewing
Logical Drive Information” on page 125.
Making Synchronization Settings
To make Synchronization settings:
1. Click on the
Background Activities icon.
2. Click the
Settings
button.
3. Click the
Background Synchronization Rate
dropdown menu and choose a rate:
•
Low
– Fewer system resources to Synchronization, more to data read/write operations.
•
Medium
– Balances system resources between Synchronization and data read/write
operations.
•
High
– More system resources to Synchronization, fewer to data read/write operations.
4. Click the
Confirm
button.
5. Click the
X
icon to close the background activities panel.
Synchronization
Summary of Contents for Pegasus3 R4
Page 4: ...iv Promise Technology Pegasus3 R4 R6 R8 VCCI KCC FCC ...
Page 5: ...v About this guide Pegasus3 Product Manual WARNING WARNING WARNING WARNING ...
Page 80: ...67 Managing the Pegasus3 Pegasus3 Product Manual Controller Settings ...
Page 207: ...194 Promise Technology Pegasus3 R4 R6 R8 View NVRAM Events ...