manualshive.com logo in svg

Promise Technology Pegasus R4i, Product Manual, Page: 43 / 163

Share
Download
Promise Technology Pegasus R4i Product Manual Download Page 43

32

Promise 

Technology 

   

   

 

Pegasus R4i 

Updating Firmware 

For best performance, it is a good idea to keep the Pegasus R4i firmware up to date. The update 

procedure is used for the controller and other system hardware. Download the latest firmware from 

the PROMISE website at 

www.PROMISE.com/support/download.aspx

 and place the .img file on your 

computer.

Keep in mind that after the update process, it will be necessary to restart your computer. 

To update the controller firmware:

1.  From the 

Admin

 drop-down menu in the menu bar  at the top of your desktop, choose 

Firmware 

Update

.

2.  Click on the padlock icon to unlock the menu, and type in the password for your computer when 

the prompt appears.

3.  Click the 

Choose File

 button and locate the .img file you downloaded from PROMISE. 

4.  Click the 

Submit 

button.

5. 

In the Confirmation box, type the word “confirm” in the field provided and click the 

Confirm 

button.

6.  The process will take several seconds to complete. Once the process has completed, you will be 

prompted to restart the computer. Once you’ve restarted your computer, you may continue to use 

the Pegasus R4i. 

Summary of Contents for Pegasus R4i




































































































































































Reviews:

No comments