manualshive.com logo in svg

Promise Technology Pegasus R4i, Product Manual, Page: 155 / 163

Share
Download
Promise Technology Pegasus R4i Product Manual Download Page 155

144

Promise 

Technology 

   

   

 

Pegasus R4i 

Performance Monitor

The Performance Monitor display can be useful for diagnosing performance issues that will not 

necessarily trigger any alerts to appear in the System Status display or event logs. You can use it for 

testing performance of different drive types. 

To display the Performance Monitor information, choose 

Performance Monitor 

from the 

Admin

 drop-

down menu in the Menu Bar. Note that it is necessary to unlock the interface before the option can be 

selected.

 

Performance information is displayed in graph form for logical drives and physical drives. Use the pull-

down menus to displayed what parameter is being measured and which logical or physical drive you 

want to monitor. The parameters available for measurement are Bandwidth (in MB/s) and I/O requests. 

Performance Monitor display

Summary of Contents for Pegasus R4i




































































































































































Reviews:

No comments