Promise Technology Pegasus R4 Product Manual Download Page 21

Page: 21 / 148

Chapter 2: Installation and Setup

Setting up the Pegasus Unit

The Pegasus unit ships ready to use without configuration or set-up. These
instructions are for users who plan to:

•

Install their own physical drives

•

Configure the Pegasus manually

Pegasus set-up involves three steps:

Opening the Promise Utility (below).

Creating a Disk Array and Logical Drive (page 15).

Formatting your Logical Drive (page 16).

Opening the Promise Utility

To open the Promise Utility, double-click the

Promise Utility

icon in

the Macintosh Dock (right).

The Promise Utility window opens and displays the Dashboard.

Figure 7. Promise Utility Dashboard

Promise

Utility

icon

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands