manualshive.com logo in svg

Promise Technology FAST TRAK S150, User Manual

Share
Download
Promise Technology FAST TRAK S150 User Manual Download Page 68

FastTrak SX4030, SX4060, S150 SX4-M User Manual

60

Post-Installation 

Why can’t I see the drives on the FastTrak SX4030, SX4060 and S150 SX4-M 
under FDISK? 

You have not created an array yet. If no array has been created, the system 
will not recognize drive(s) attached to the FastTrak Controller. 

How can I obtain the latest FastTrak drivers? 

Download the latest drivers from the Promise Technology website at 

www.promise.com

.

Contact Technical Support

Promise Technical Support provides several support options for Promise users to 
access information and updates. We encourage you to use one of our electronic 
services, which provide product information updates for the most efficient service 
and support.

If you decide to contact us, please have the following information available:
•

Product model and serial number

•

BIOS and driver version numbers

•

A description of the problem / situation

•

System configuration information, including: motherboard and CPU type, 
hard drive model(s), ATA/ATAPI drives & devices, and other controllers.

Technical Support Services

North & South America

Promise Online™ Web Site

http://www.promise.com
(technical documents, drivers, utilities, etc.)

E-mail Support

[email protected]

Fax Technical Support

(408) 228-6401
Attention: Technical Support

Phone Technical Support

(408) 228-6402
7:30-5:30pm M-F Pacific Standard Time

If you wish to write us for 
support: 

Promise Technology, Inc.
Attn: Technical Support
1745 McCandless Drive
Milpitas, CA 95035, USA

Summary of Contents for FAST TRAK S150











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands