manualshive.com logo in svg

Promise Technology FAST TRAK S150, User Manual

Share
Download
Promise Technology FAST TRAK S150 User Manual Download Page 46

FastTrak SX4030, SX4060, S150 SX4-M User Manual

38

SuSE Linux 8.1, 8.2 

Install Driver During New OS Installation: Single Processor

1.

Insert the install CD into CD-ROM drive. 

2.

When the boot: picture prompts for an installation option, add the following 
line to the input box: 

acpi=oldboot

. 

3.

Press the left Alt key and insert the FastTrak driver diskette into the floppy 
drive. 

4.

Finish the installation normally. 

Note:

 Check the readme file, included with the downloaded driver files, for 

instructions on installing the RAID Console.

Install Driver During New OS Installation: Multi-Processor

1.

Set the BIOS to boot from the CD-ROM. 

2.

Insert the install CD into CD-ROM drive. 

3.

When the boot: prompt appears on the bottom of the screen, type 

acpi=oldboot 

into the lower input box. 

4.

Press the left Alt key and insert the FastTrak driver diskette into the floppy 
drive 

5.

Finish the installation normally. 

Note: 

Check the readme file, included with the downloaded driver files, for 

instructions on installing the RAID Console. 

Install Driver in an Existing System 

1.

Insert the FastTrak driver diskette into the floppy drive. 

2.

Type the following commands: 

# mount /dev/fd0 /media /floppy 
# cd /media /floppy 
# ./install 
# insmod FastTrak 
# umount /media /floppy 

3.

Remove the FastTrak driver diskette from the floppy drive. 

Note:

 Check the readme file, included with the downloaded driver files, for 

instructions on installing the RAID Console.

Summary of Contents for FAST TRAK S150











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands