FastTrak SX4030, SX4060, S150 SX4-M User Manual
18
Define Array
Press 2 on the Main Menu screen to display, the Define Array Menu (see below).
This screen displays any existing arrays. Users commonly create one or two
arrays with FastTrak SX4030, SX4060 or S150 SX4-M.
To manually create arrays from the Define Array Menu (below), press the arrow
keys to highlight an array number you wish to define, and press Enter to select it.
The Define Array Definition Menu will next appear that allows drive assignments
to the disk array (see below).
Array No.
– The Array Number column displays all arrays (defined or undefined)
addressable by the FastTrak Controller.
RAID Level
– This column indicates the RAID type applied to a particular array.
Total Drv This column displays the number of drives configured for the array.
Capacity (MB)
– This column shows the total capacity in MB (megabytes) for
each array.
Status
– This column displays the status information for each array. See page 14
for status definitions.
FastBuild Array Utility 2.xx (c) 2002-2005 Promise Technology, Inc.
[ Define Array Menu ]
[ Keys Available ]
Array No
RAID Level
Total Drv
Capacity (MB)
Status
Array 1
-----
-----
-----
-----
Array 2
-----
-----
-----
-----
Array 3
-----
-----
-----
-----
Array 4
-----
----
-----
-----
Note: * --Bootable Array
[ ] Up [ ] Down
[ESC] Exit
[Enter] Select
[Space] Change Boot Drive
