5
Design and function
5.1 System construction
The system parts for powder storage, powder metering, wetting, dissolving
and maturing of the powder polymers are combined in a compact unit.
An Ultromat
®
is assembled using the identity code from the following func‐
tional units:
n
Water apparatus (1)
n
Concentrate pump (2)
n
Stirrer (3)
n
Flush valve (4)
n
Powder feeder (5)
n
Control cabinet (6)
n
Twin chamber storage tank (7)
n
Discharge pipework with motorised ball valve 8
n
Pressure sensors for level measurement (9)
The flush valves and water piping are available in either PVC or PP.
1.
2.
3.
4.
5.
3.
7.
9.
8.
9.
A0901
6.
Fig. 4: System construction
The seals are made from EPDM as standard. The stirrer shafts and pro‐
pellers of the stirrers plus the liquid end of the powder feeder are made
from corrosion-resistant stainless steel.
5.2 Description of the Component Assemblies
The units are only available, if they were selected with the
identity code.
Design and function
18