25
Declaration of Incorporation for Machinery
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
n
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
D - 69123 Heidelberg, Germany,
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us. Technical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Tab. 17: Extract from the Declaration of Incorporation
Designation of the product:
Metering pump without motor, product range Sigma
Design for use in areas at risk of explosion in accordance with the ATEX Direc‐
tive (2014/34/EC)
Product type:
S1Ba _ _ _ _ _ _ _ _ _ _ _ _ _ _ § A _ _
with characteristics
§ = "2" or "3" or "G"
Serial number:
see nameplate on the device
Relevant directives:
ATEX Directive (2014/34/EU)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
Harmonised standards applied, in
particular:
EN 13463-1:2009
EN 13463-5:2011
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
Only start up the pump when it has been established that the machine into which the pump has been installed corre‐
sponds to the provisions of the Machine Directive.
EX-designation:
II 2G IIC T4 X
X: max. medium temperature 90 °C
Ambient temperature -10 °C ... + 40 °C
Assess the ignition risk when combining the pump and motor.
Date:
20.04.2016
You can download the Declaration of Conformity at www.prominent.com.
For pumps without explosion protection:
Declaration of Incorporation for Machinery
89