ProMinent S3Cb, Operating Instructions Manual, Page: 106 / 124

20 Wear parts for S3Cb
Refer also to the previous chapter.
20.1 Standard
Spare part Order no.
HMI wall bracket 1036683
HMI protective film 1083680
20.2 Physiological safety
Tab. 22: Scope of delivery with PVT material version
1 x diaphragm, 2 x valve balls, 1 x suction valve complete, 1 x discharge valve complete
1 x elastomer sealing set (EPDM)
2 x ball seat housings, 2 x ball seat discs, 4 x composite seals
1x sealing washer (for bleed valve or relief valve)
Tab. 23: Scope of delivery with SST material version
1 x diaphragm, 2 x valve balls
2 x cover rings
4 x composite seals
1x sealing washer (for bleed valve or relief valve)
Tab. 24: Spare parts kits PVT (liquid ends)
Liquid end Types 120145, 120190, 120270
FM 330 1046478
Tab. 25: Spare parts kits SST (liquid ends)
Liquid end Types 120145, 120190, 120270
FM 330 1046479
FM 330 with 2 complete valves 1046480
Material version Liquid end Suction / pressure
connector
Seals* / ball seat Balls Integrated bleed
valve or relief
valve
PVT PVDF PVDF PTFE / PVDF Glass PVDF / EPDM
SST Stainless steel
1.4404
Stainless steel
1.4581
PTFE / PVDF Stainless steel
1.4404
Stainless steel /
EPDM
* Metering diaphragm is PTFE-coated; seals are PTFE composite seals
HMI spare parts
Spare parts kits
Ordering information
Wetted materials – only with the design
"Physiological safety with regard to wetted
materials"
Wear parts for S3Cb
106