ProMinent ProMix Series, Operating Instructions Manual, Page: 8 / 68

Pr o Minent ProMix
‘DB' & 'PB’ Polymer Feeder
ProMix Series MA Batch/Inline User Manual
8
iii. Polymer Pumps used on M Models
Series Identification Code
Factory
Default
Mode
SPM
Max
Flowrate (GPH)
Pressure
(PSIG)
Min @
100%
Stroke
Max @
100%
Stroke
GXLA
GXLAUS1020PVT4V000UV4030EN
HV2 120 0.019 3.24 145
GXLA GXLAUS1020PVT4V000UV4030EN
Standard
200 0.019 5.18 145
GXLA
GXLAUS0730PVT4V000UV4030EN
Standard 200 0.031 7.76 102
GXLA GXLAUS0450PVT2V000UV4030EN
Standard
200 0.11 12.95 58
Notes:
1. ProMinent
– Gamma XL Solenoid Driven Metering Pump
2. Original Pump GPH rating is derated 20% due to Polymer viscosity. The
actual deration may vary depending on the polymer used
3. Control Modes Available *
a. Standard
– 200 spm: 0-50 cp
b. HV1 (slightly reduced discharge speed)
– 180 spm: 50-200 cp
c. HV2 (moderately reduced discharge speed)
– 120 spm: 200-500 cp
d. HV3 (maximum reduced discharge speed)
– 80 spm: 500-1000 cp
4.
Connections: ½” x 3/8” or DN10 Depending on Model Selected
5. Power Requirements: 115VAC, 60 Hz, Single Phase
* Viscosity values are approximate and can vary widely per specific application. Use these values
as a guideline only and consult the factory for specific application capabilities