Pr
o
Minent ProMix
‘S & C’ Polymer Feeder
ProMix Series S&C User Manual
2.4 Modify Timing
Press
ENTER
@
Polymer
to view or adjust the feeder timing.
Fill Time
is the time that the feeder waits to fill the feeder
prior to turning on the
Polymer Feed
pump. This protects the
mechanical seal of the mixer motor shaft by keeping it wet.
Minimum time is 30 seconds for the first fill only. Thereafter
this step is skipped if operation pauses unless electrical
power to the controller is cycled. Key
ENTER
to modify.
Flush Time
is the time water flows after initiation of a Flush
Cycle. This is a maintenance feature and can be manually
initiated by (1) placing the controller door System Start Switch
in the OFF position for more than 2 seconds or (2) by
opening the remote start contact for longer than 2 seconds or
(3) by using the keypad menu. Key
ENTER
to modify time.
Wait for Flow
may be adjusted to any time
from 1 to 30 seconds.
Press
ENTER
to adjust.
Diagnostics
displays the input current loop power voltage.
Press
ENTER
to view diagnostic data set.
Refer to 4.2 for detail.
Interlock
(CI)
could be set to NO/NC using key
Feed Verify
ON/OFF
could be set to ON using for pulse
feedback from Metering pump (metering pump must have pulse
(dry contact output)
Feed Verify
may be adjusted to any time from 1 to 300 seconds.
Press
ENTER
to adjust
Summary of Contents for ProMix C
