ProMinent ProMix C, Operating Instructions Manual

Page: 17 / 59

Pr o Minent ProMix
‘S & C’ Polymer Feeder
ProMix Series S&C User Manual
2.2 Main Menu
This is the power ON, top of the menu display.
Press EXIT at any display to return here.
Displays the Polymer feed rate 0-100% and the current
state of the feeder. See 1.6 for complete state table.
Displays the Polymer Pump feed rate 0-100%
and the controlling 4-20mA current level,
Press ENTER @ Polymer Pump to view-adjust the Manual
Setpoint & Calibrate the 4-20mA controlling the pump.
Mixer ON time resets to zero every time
the Mixer turns OFF.
Press ENTER during Remote RUN or Local RUN to turn
OFF the Polymer pump and flush the mixer.
The Remote Setpoint 4-20mA current loop controls the
Polymer Pump in Remote RUN mode.
Press ENTER to calibrate.
Flowswitch ON time resets to zero every time
the Flowswitch turns OFF.
After 24 hours displays >1Day .
The Remote Start contacts must be closed
for the polymer feeder to run.
Remote Start time resets to zero every time
the contact set opens.
We’re now back at the top of the main menu.
Sidebar:
Press ENTER at Polymer to view and adjust feeder Fill , Flush & Wait-for-Flow timing.
Press ENTER & UP at Polymer to view feeder Diagnostics . Refer to 2.17 for Diagnostic
displays.