1
About the product
A3468
Fig. 1: DULCOZON OZLa
The DULCOZON OZLa series of ozone generation systems is
designed as a pressurised system. The feed gas, oxygen, is fed to
the ozone generator under pressure in the system.
The electronic power unit provides extensive protection for the
electrical components (high-voltage transformer and power stage)
and also permits the correct digital display of the ozone output in
"grammes/hour". As a result, any required ozone volume between
3 and 100% of the nominal output can be set reproducibly and
largely independently of voltage and pressure fluctuations.
Operation under pressure means that the ozone generated can be
introduced directly into water systems with ≦ 2.5 bar back pressure
The "control valve" option keeps the ozone concentration or the
gas flow constant regardless of the ozone volume required, as far
as this is possible.
The integral data logger writes data to an SD card where it is
stored.
1.1 Function of the system
The system generates ozone from oxygen for water disinfection.
About the product
6
Summary of Contents for OZLa 06 O
Page 7: ...1 2 Nameplate A3540 Fig 2 Nameplate About the product 7...
Page 70: ...70...
Page 71: ...71...
