11.2.6.3
Pressure unit
‘Menu / Information
è
Settings
è
System
è
Pressure unit
è
...’
In the
‘Pressure unit’
sub-menu, you can select another unit for the pres‐
sure.
11.2.7 Inputs/Outputs
‘Menu / Information
è
Settings
è
Inputs/Outputs
è
...’
The
‘Inputs/Output’
menu splits into the following sub-menus:
1 -
‘Auxiliary capacity’
/
‘Auxiliary frequency’
2 -
‘Relay1’
(Option)
3 -
‘Relay2’
(Option)
4 -
‘mA output’
(Option)
5 -
‘Dosing monitor’
(only if connected)
6 -
‘Diaphragm rupture’
(only if connected)
7 -
‘Pause input’
(Option)
8 -
‘Level warning’
9 -
‘Level error’
11.2.7.1
‘Auxiliary Capacity’
/
‘Auxiliary Frequency’
‘Menu / Information
è
Settings
è
Inputs/Outputs
è
Auxiliary capacity / Auxiliary frequency
è
...’
The programmable function
‘Auxiliary capacity’
/
‘Auxiliary frequency’
permits the switch-over to an additional capacity / stroke rate that can be
fixed in the
‘Auxiliary capacity’
/
‘Auxiliary frequency’
menu.
It can be activated via the "External control" terminal. If
‘Auxiliary
capacity’
/
‘Auxiliary frequency’
is being used, then the identifier "AUX"
appears on the LCD screen.
Refer to the "Hierarchy of Operating Modes, Functions and Fault Statuses"
for the order of the various operating modes, functions and fault statuses.
11.2.7.2
‘Relay1 (Option)’
‘Menu / Information
è
Settings
è
Inputs/Outputs
è
Relay1
è
...’
The setting options for the ‘Relay’ function only exist if a
relay is fitted.
Set Up /
‘Menu’
57
