ProMinent DULCOTROL DWCa, Assembly And Operating Instructions Manual, Page: 61 / 140

11.2.4 Continuous display
A1861
1
2
3
4
5
6
7
ConI
µ
S/cm
Fig. 27: Continuous display
1 Measured variable (switch using
[ESC]): the fol‐
lowing are possible:
[ConI], [RES], [TDS] and
[SAL]
2 Reference temperature or temperature compen‐
sation
3 Control variable
4 Possible error text: for example
[Limit↓] (direc‐
tion of limit value transgression e.g. value below
the limit in this case)
5 Temperature (correction variable)
6 Measured value (actual value)
7 Operating status
The bottom line displays the current measuring temperature and/or
a temperature manually entered. The temperature display cannot
be switched off.
The temperature (measuring temperature or reference tempera‐
ture) is needed to calculate all measured variables, which is why
the second line of the continuous display therefore displays infor‐
mation about temperature compensation and the reference tem‐
perature.
The setpoint is displayed in the Information menu.
Use the key to switch between the controller's measured varia‐
bles [ConI], [RES], [TDS] and [SAL] in the continuous display.
Depending on the measured variable set, the settings of variables
are changed or the variables are hidden completely in the
[INPUT
Ø
TCOMP] menu and in the [LIMIT] menu.
11.2.5 Information display
The most important parameters for each first-level menu item are
displayed in the information display.
Use to access the information display from the continuous dis‐
play. Pressing again calls up the next information display.
Pressing calls up the continuous display again.
Switching between measured varia‐
bles
User interface of the controllers
61